YEIDA, 15-LIC200 15 kV, 200A Cable Loadbreak Protective Cap 15 kV 高壓電纜插頭封套
宜大 15 kV 插頭封套
宜大插頭封套常與套管插頭,雙通套管插頭,各路分歧插頭配合使用。其
設計應用於實體密封以及介面絕緣的用途上。
插頭封套設計有拉環
以便操作,以及附有接地軟銅線可供安裝。產品可以用於永久或暫時安裝皆可。
15 kV, 200A Loadbreak Protective Cap
Application
The YEIDA Protective Cap is an accessory product to other 15 kV, 200A products with loadbreak interfaces (bushing inserts, loadbreak junctions, feed thru inserts, etc.). It is designed to physically seal and electrically insulate loadbreak bushing interfaces. When installed on a loadbreak bushing interface, and properly grounded using the attached drain wire, the Loadbreak Protective Cap provides a submersible, fully shielded insulated cap for energized bushings.
The Loadbreak Protective Cap can be used for temporary or permanent applications
Production Tests
Tests conducted in accordance with IEEE/ANSI Standard 386. • Minimum Corona Voltage Level – 11 kV • AC 1 Minute Withstand – 34 kV
Tests conducted in accordance with Chardon manufacturing process requirements: • Physical Inspection • Periodic Dissection • Periodic X-Ray analysis
|