宜大 25 kV 套管插頭

宜大 25 kV 套管插頭可以與標準的200 A 套管井配合組裝，另一端則通
常與肘型端頭配合使用；電流路徑使用全銅設計，提供了可靠及穩定的載流能力
表現。YEIDA 套管插頭設計符合IEEE 386 規範的要求，可與其他符合386
規範的產品組裝使用；本產品內部有六角孔設計，用戶可使用六角板手組裝，產
品有黃色指示環設計，組裝時用戶可確認組裝是否確實完成。

 

Application

The Chardon Bushing Insert threads onto a standard 200A bushing well.
The combination of the bushing well and bushing insert perform the same function
as a one piece integral loadbreak bushing, while providing the flexibility to change
the bushing insert in the field, without taking the transformer or other apparatus out of service. The bushing
insert and loadbreak elbows are the primary components in all ANSI/IEEE loadbreak connections.

The Chardon Bushing Insert incorporates an all copper current path. This provides reliable and consistent
performance under all conditions.
The Chardon Bushing Insert meets all the requirements of IEEE Standard 386, and is fully interchangeable with
competitors products and mating products that also meet IEEE Standard 386. When installed with mating
components, the bushing insert provides a fully shielded and fully submersible connection for loadbreak
applications.
No special tools are required for installation. The bushing insert can be installed by hand or with the assistance
of a torque tool. An internal hex broach allows for the installation by the torque tool.

Production Tests

Tests conducted in accordance with IEEE/ANSI Standard 386.
• Minimum Corona Voltage Level – 19 kV
• AC 1 Minute Withstand – 40 kV
Tests conducted in accordance with Chardon manufacturing process requirements:
• Physical Inspection
• Periodic Dissection
• Periodic X-ray Analysis

KEYWORD: 宜大電線, 台灣電力公司, 3M, Tyco, 太平洋電線, 士林電機, 中興電工,東元馬達, 高壓電線, 高壓電纜處理頭,
YEIDA, 25-LBI200, 200A, 25 kV,  Loadbreak Bushing Insert, 負載斷路套管插頭, IEEE386