25 kV 分歧插頭

25 kV 分歧插頭內部設計有匯流排連結，產品提供2/3/4 路三種組
合，內含全銅載流路徑，提供穩定及可靠的作業性能；介面設計符合IEEE 386
規範，可與其他符合386 規範的產品組裝使用，分歧插頭可選用不鏽鋼材質鐵架
或U 型固定片搭配安裝使用；產品有黃色指示環設計，組裝時用戶可確認組裝是
否確實完成。

200A, 25kV Class Loadbreak Junction

Application

The Chard 200 A, 25 kV Class Loadbreak Junction provides two, three or four 15.2/26.3 kV loadbreak interfaces
that are internally bused together and meet all requirements of IEEE Standard 386™ —Separable Insulated
Connector Systems. Loadbreak junctions are used in pad-mounted apparatus, under-ground vaults, and other
apparatus to sectionalize, establish loops, taps, or splices, and to facilitate apparatus changeouts.
Sectionalizing a cable run to find and isolate a cable fault is made easy when a loadbreak junction is used
with 25 kV Class Loadbreak elbows and other accessories meeting the requirements of IEEE Standard 386™.

The Chard Loadbreak design incorporates an all copper current carrying path, which provides reliable and
consistent performance under all conditions

The Chard Loadbreak Junction meets all the requirements of IEEE standard 386, and is fullyinterchangeable
with competitors products and mating products that also meet IEEE Standard 386. When installed with mating
components, the loadbreak junction provides a fully shielded connection for loadbreak applications.

Production Tests

Tests conducted in accordance with IEEE/ANSI Standard 386.
• Minimum Corona Voltage Level – 19 kV
• AC 1 Minute Withstand – 40 kV
• Test Point Voltage Test
Tests conducted in accordance with Chardon manufacturing process quirements:
• Physical Inspection
• Periodic Dissection
• Periodic X-Ray analysis

KEYWORD: 宜大電線, 台灣電力公司, 3M, Tyco, 太平洋電線, 士林電機, 中興電工,東元馬達, 高壓電線, 高壓電纜處理頭,
YEIDA, 25-LJ200F, 200A, Loadbreak Junction, 25 kV 分歧插頭, IEEE386