1. ALPHA-FIT 2:1 Shrink Ratio Heat-Shrink Tubing 通用熱縮管
    ALPHA-FIT 3:1 Shrink Ratio Heat-Shrink Tubing 通用熱縮管
    ALPHA-FIT 4 : 1 Shrink Ratio Heat-Shrink Tubing 通用熱縮管
    ALPHA-FIT 5 : 1 Shrink Ratio Heat-Shrink Tubing 通用熱縮管
    ALPHA-FIT 6 : 1 Shrink Ratio Heat-Shrink Tubing 通用熱縮管
    ALPHA-FIT® Special-Application Tubing 特殊比率材質熱縮管
    ALPHA-Heat Guns 加熱槍
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > ALPHA-FIT 3:1 Shrink Ratio Heat-Shrink Tubing 通用熱縮管

    ALPHA- FIT®-321 Heat-Shrink Tubing 3 : 1 Shrink Ratio, AMS-DTL-23053/4 Class 3 UL 224 CSA 198 Dual-Wall XLPO, Adhesive Lined 熱縮管
    看原圖
    		ALPHA-FIT-321

    商品編號: ALPHA-FIT-321

    ALPHA- FIT®-321 Heat-Shrink Tubing 3 : 1 Shrink Ratio, AMS-DTL-23053/4 Class 3 UL 224 CSA 198 Dual-Wall XLPO, Adhesive Lined 熱縮管
     

    Heat-Shrink Tubing
    FIT®-321 Heat-Shrink Tubing
    3:1 Shrink Ratio, Dual-Wall XLPO, Adhesive Lined
    AMS-DTL-23053/4 Class 3
    UL 224
    CSA 198
    • Thicker wall for increased durability
    • Water-resistant inner permanent-bonding adhesive
    　

    Operating Temperature
    • -55°C to +125°C
    Shrink Temperature
    • 110°C min.
    • 110°C full recovery
    Material
    • Dual-wall flexible polyolefin with thick-wall adhesive
    Color
    • Black
    Physical Properties
    • Tensile strength: 1500 psi (10.34 N/mm2)
    • Elongation: 250% min
    • Longitudinal change: +1%/-15%
    • Flame retardant
    • Shelf life: 3 years at 18°C to 35°C
    Chemical Properties
    • Corrosive effect: none
    • Fungus resistance: no growth
    • Water absorption: 1.0% max
    • Fluid resistance: 900 psi (6.20 N/mm2)
    • UV resistant
    • Lead free
    Electrical Properties
    • 600 V (UL, CSA)
    • Dielectric strength: 300 V/mil (118 kV/cm)
    • Volume resistivity: 1012 ohm-cm
    Availability
    See table
    		 
       
       
       

    The perfect FIT for any need

    Need to protect a crimped terminal mechanically or environmentally? Color code wires for easy circuit identification? Make fast, reliable repairs to nicked or worn insulation? Whether your concerns are mechanical strain relief, environmental sealing, or organizing wires, Alpha Wire’s FIT® heat-shrink tubing is ideal for solving many challenges in electrical and electronic wiring.

    完美地满足任何需求

    需要保护压接终端免受机械磨损和环境影响吗？ 需要使用不同颜色标记线路吗？ 要快速、可靠地修复绝缘缺口或磨损吗？无论您关注的是机械应力释放、环境密封或电线管理，Alpha Wire 的 FIT® 热缩管都非常适合用于解决电气和电子布线中出现的许多问题。
    		 
       
    　 Part # Shrink Ratio Material Min Supplied ID

    　

    		 Max Recovered ID

    　

    		 Nom Recovered Wall　 Temperature
    FIT-321-MS-1 3:1 Dual Wall IRR PO 　 　 　 -55 to 110 AMS DTL-23053/4 Class 3, CA Prop 65, CSA 198, RoHS, UL 224, UL VW-1
    FIT-321-1 3:1 Dual Wall Flexible PO Thk Wall 0.94 0.32 0.1 -55 to 125 AMS DTL-23053/4 Class 3, CA Prop 65, CSA 198, REACH Regulation, RoHS, UL 224
    FIT-321-1/2 3:1 Dual Wall Flexible PO Thk Wall 0.47 0.16 0.07 -55 to 125 AMS DTL-23053/4 Class 3, CA Prop 65, CSA 198, RoHS, UL 224
    FIT-321-1/4 3:1 Dual Wall Flexible PO Thk Wall 0.24 0.08 0.04 -55 to 125
    FIT-321-1/8 3:1 Dual Wall Flexible PO Thk Wall 0.12 0.04 0.04 -55 to 125
    ST-300-1IN 3:1 SR XLPO 1 0.4 0.075 -55 to 110
    ST-303-3/4 3:1 Dual Wall IRR PO 　 　 　 -55 to 125
    ST-303-3/8 3:1 Dual Wall IRR PO 　 　 　 -55 to 125
    FIT-321-1-1/2 3:1 Dual Wall Flexible PO Thk Wall 1.57 0.51 0.1 -55 to 125 AMS DTL-23053/4 Class 3, CA Prop 65, CSA 198, RoHS, UL VW-1