1. ALPHA-FIT 2:1 Shrink Ratio Heat-Shrink Tubing 通用熱縮管
    ALPHA-FIT 3:1 Shrink Ratio Heat-Shrink Tubing 通用熱縮管
    ALPHA-FIT 4 : 1 Shrink Ratio Heat-Shrink Tubing 通用熱縮管
    ALPHA-FIT 5 : 1 Shrink Ratio Heat-Shrink Tubing 通用熱縮管
    ALPHA-FIT 6 : 1 Shrink Ratio Heat-Shrink Tubing 通用熱縮管
    ALPHA-FIT® Special-Application Tubing 特殊比率材質熱縮管
    ALPHA-Heat Guns 加熱槍
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > ALPHA-FIT 3:1 Shrink Ratio Heat-Shrink Tubing 通用熱縮管

    ALPHA-FIT-700-21 3:1 IRR PO w/Thermoplastic Adhesive -55 to 90 CA Prop 65, CSA 22.2, REACH , RoHS, UL 486D 90°C 連續使用時，2KV高電壓熱縮管
    看原圖
    		ALPHA-FIT-700-21

    商品編號: ALPHA-FIT-700-21

    ALPHA-FIT-700-21 3:1 IRR PO w/Thermoplastic Adhesive -55 to 90 CA Prop 65, CSA 22.2, REACH , RoHS, UL 486D 90°C 連續使用時，2KV高電壓熱縮管
     

    Bonding, thermoplastic adhesive lined Bonds to most materials
    High voltage: to 2 kV at 90°C continuous use

    接合, 热塑性胶合剂内衬
    粘合大多数材料
    高电压：90°C 连续使用时，2 千伏

    Part # Shrink Ratio Material Min Supplied ID Max Recovered ID Nom Recovered Wall Temperature Ratings
    FIT-700-21 3:1 IRR PO w/Thermoplastic Adhesive 0.75 0.24 0.09 -55 to 90 CA Prop 65, CSA 22.2, REACH Regulation, RoHS, UL 486D

    ALPHA的 FIT 热缩管为保护和密封终端或提供额外的机械强度提供一种可靠的方式。FIT热缩产品是在严格的控制下利用高质量复合材料制造而成的。这意味着，FIT 将始终保持优良的物理特性，例如较小的纵向收缩率和较宽的温度范围，并且在单独使用或结合其它设备使用时，具有优雅的外观。
    		 
       



         		  
     
    Construction
    1) Tubing Type Adhesive Lined Heat Shrinkable Tubing
    2) Tubing Material Heavy Wall XLPO with Adhesive
    3) Minimum Supplied ID(In) 0.750
    4) Maximum Recovered ID(In) 0.240
    5) Minimum Recovered Adhesive Wall Thickness(In) 0.120
    6) Color(s) BLACK
    Applicable Specifications
    1) UL Standard 486 　
    2) CSA International Standard 198 　
    3) Other ANSI C119:1 　
    　 UV Resistant 　
    Environmental
    1) EU Directive 2002/95/EC(RoHS):
    　 All materials used in the manufacture of this part are in compliance with EU Directive 2002/95/EU regarding the restriction of use of certain hazardous substances in electrical and electronic equipment. Consult Alpha Wire's web site for compliance Date of Manufacture.
    2) REACH Regulation (EC 1907/2006):
    　 This product does not contain any of the 16 substances listed on the European Union's REACH Substance of Very High Concern (SVHC) candidate list in excess of 0.1% mass of the item.
    3) California Proposition 65: The outer surface materials used in the manufacture of this part meet the requirements of California Proposition 65.
    Properties
    Physical & Mechanical Properties
    1) Temperature Range -55 to 110°C 　
    2) Shrink Ratio Approximately 3:1 　
    3) Full Recovery Temperature 120°C 　
    4) Minimum Shrink Temperature 120°C 　
    5) Tensile Strength 2100psi, Min ASTM D638
    6) Elongation 600%, Min ASTM D638
    7) Low Temperature Flex(-55°C) no cracking AMS-DTL-23053
    8) Heat Shock(225°C,4hrs) no cracking AMS-DTL-23053
    9) Longitudinal Change +1%/-10% AMS-DTL-23053
    10) Specific Gravity 1.10, Max ASTM D792
    11) Shelf Life 25 Years @ 18 to 35°C 　
    Electrical Properties
    1) Dielectric Strength 500 V/mil, Min ASTM D876
    2) Volume Resistivity 1x10 17 ohm-cm, Min ASTM D876
    Chemical Properties
    1) Water Absorption 0.10%, Max ASTM D570
    2) Corrosion(0°C,16hrs) no corrosion AMS-DTL-23053
    3) Fungus Resistance Pass AMS-DTL-23053
    4) Halogen Free No 　
    5) Lead Free Yes 　
    Other
    Packaging
    6X12 IN

    Our FIT heat-shrink tubing offers a reliable way to protect and seal terminations or add additional mechanical ruggedness. FIT preferred heatshrink products are made from premium compounds under the tightest manufacturing controls. This means FIT will consistently have excellent physical characteristics such as low longitudinal shrinkage and wide temperature ranges while providing an elegant appearance when used alone or on OEM equipment.

    EU/China ROHS CERTIFICATE OF COMPLIANCE
    To Whom It May Concern:
    Alpha Wire Part Number: FIT-700-21
    FIT-700-21, RoHS-Compliant Commencing With 8/1/2004 Production
    This document certifies that the Alpha part number cited above are manufactured in accordance with Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003, better known as the RoHS Directives, with regards to restrictions of the use of certain hazardous substances used in the manufacture of electrical and electronic equipment. The reader is referred to these Directives for the specific definitions and extents of these Directives. No Exemptions are required for RoHS Compliance on this item. Additionally, Alpha certifies that the listed part number is in compliance with the European Union’s Restriction of Hazardous Substances (RoHS) Directive, 2002/95/EC and all subsequent revisions and China RoHS “Marking for Control of Pollution by Electronic Information Products” standard SJ/T 11364-2006.
    Substance Maximum Control Value
    Lead 0.1% by weight (1000 ppm)
    Mercury 0.1% by weight (1000 ppm)
    Cadmium 0.01% by weight (100 ppm)
    Hexavalent Chromium 0.1% by weight (1000 ppm )
    Polybrominated Biphenyls (PBB) 0.1% by weight (1000 ppm)
    Polybrominated Diphenyl Ethers (PBDE) , 　
    Including Deca-BDE 0.1% by weight (1000 ppm)
    The information provided in this document and disclosure is correct to the best of Alpha Wire's knowledge, information and belief at the date of its release. The information provided is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it will become part of. The intent of this document is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product.
    Authorized Signatory for the Alpha Wire Company:
    Dave Watson, Director of Engineering & QA 1/15/2012
    		 
       
    Part # AWG / Shrink ratio Material C° Voltage #Elements Category Shielding Ratings
    CAP-21 2:1 sr-po -55 to 135 n/a n/a Tubing/Accessories no ca prop 65;rohs
    CAP-22 2:1 sr-po -55 to 135 n/a n/a Tubing/Accessories no ca prop 65;rohs
    CAP-23 2:1 sr-po -55 to 135 n/a n/a Tubing/Accessories no ca prop 65;rohs
    CAP-24 2:1 sr-po -55 to 135 n/a n/a Tubing/Accessories no ca prop 65;rohs
    CAP-25 2:1 sr-po -55 to 135 n/a n/a Tubing/Accessories no ca prop 65;rohs
    CAP-26 2:1 sr-po -55 to 135 n/a n/a Tubing/Accessories no ca prop 65;rohs
    CAP-27 2:1 sr-po -55 to 135 n/a n/a Tubing/Accessories no ca prop 65;rohs
    FIT-700-21 3:1 irr po w_thermoplastic adhesive -55 to 90 n/a n/a Tubing/Accessories yes ca prop 65;reach regulation;rohs;ul 486d;csa 22_2
    FIT-700-22 3:1 irr po w_thermoplastic adhesive -55 to 90 n/a n/a Tubing/Accessories yes ca prop 65;csa 22_2;reach regulation;rohs;ul 486d
    FIT-700-23 3:1 irr po w_thermoplastic adhesive -55 to 90 n/a n/a Tubing/Accessories yes ca prop 65;csa 22_2;reach regulation;rohs;ul 486d
    FIT-700-24 3:1 irr po w_thermoplastic adhesive -55 to 90 n/a n/a Tubing/Accessories yes ca prop 65;csa 22_2;reach regulation;rohs;ul 486d
    FIT-700-25 3:1 irr po w_thermoplastic adhesive -55 to 90 n/a n/a Tubing/Accessories yes ca prop 65;csa 22_2;reach regulation;rohs;ul 486d
    FIT-700-26 3:1 irr po w_thermoplastic adhesive -55 to 90 n/a n/a Tubing/Accessories yes ca prop 65;csa 22_2;reach regulation;rohs;ul 486d
    PIF20017 n/a fiberglass silicone -70 to 200 n/a n/a Tubing/Accessories n/a ul 1441;nema vs-1;mil-i-3190e
    SPCM-170 3:1 irr po w_thermoplastic adhesive -55 to 110 n/a n/a Tubing/Accessories yes ams dtl-23053_15;ca prop 65;rohs
    ZIP-41-1-1/2 n/a pvc -20 to 105 n/a n/a Tubing/Accessories n/a ul 224;mil-i-631;ul vw-1
    ZIP-41-1-1/4 n/a pvc -20 to 105 n/a n/a Tubing/Accessories n/a ul 224;mil-i-631;ul vw-1
    ZIP-41-1-3/4 n/a pvc -20 to 105 n/a n/a Tubing/Accessories n/a ul 224;mil-i-631;ul vw-1
    ZIP-41-1/2 n/a pvc -20 to 105 n/a n/a Tubing/Accessories n/a ul 224;mil-i-631;ul vw-1
    ZIP-41-1IN n/a pvc -20 to 105 n/a n/a Tubing/Accessories n/a ul 224;mil-i-631;ul vw-1
    ZIP-41-2-1/4 n/a pvc -20 to 105 n/a n/a Tubing/Accessories n/a ul 224;mil-i-631;ul vw-1
    ZIP-41-2IN n/a pvc -20 to 105 n/a n/a Tubing/Accessories n/a ul 224;mil-i-631;ul vw-1
    ZIP-41-3/4 n/a pvc -20 to 105 n/a n/a Tubing/Accessories n/a ul 224;mil-i-631;ul vw-1
    ZIP-41-3IN n/a pvc -20 to 105 n/a n/a Tubing/Accessories n/a ul 224;mil-i-631;ul vw-1
    ZIP-41-5/8 n/a pvc -20 to 105 n/a n/a Tubing/Accessories n/a ul 224;mil-i-631;ul vw-1
    ZIP-41-7/8 n/a pvc -20 to 105 n/a n/a Tubing/Accessories n/a ul 224;mil-i-631;ul vw-1