1. ALPHA-FIT 2:1 Shrink Ratio Heat-Shrink Tubing 通用熱縮管
    ALPHA-FIT 3:1 Shrink Ratio Heat-Shrink Tubing 通用熱縮管
    ALPHA-FIT 4 : 1 Shrink Ratio Heat-Shrink Tubing 通用熱縮管
    ALPHA-FIT 5 : 1 Shrink Ratio Heat-Shrink Tubing 通用熱縮管
    ALPHA-FIT 6 : 1 Shrink Ratio Heat-Shrink Tubing 通用熱縮管
    ALPHA-FIT® Special-Application Tubing 特殊比率材質熱縮管
    ALPHA-Heat Guns 加熱槍
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > ALPHA-FIT® Special-Application Tubing 特殊比率材質熱縮管

    ALPHA- FIT®-PRINT Heat-Shrinkable Identification System 3:1 Shrink Ratio, XLPO 交連 PO 熱縮管
    看原圖
    		ALPHA-FIT-PRINT-1-8

    商品編號: ALPHA-FIT-PRINT-1-8

    ALPHA- FIT®-PRINT Heat-Shrinkable Identification System 3:1 Shrink Ratio, XLPO 交連 PO 熱縮管
     

    FIT®-PRINT Heat-Shrinkable Identification System
    3:1 Shrink Ratio, XLPO
    UL 224 CSA 198
    MIL-STD-202F Method 215J
    • Permanent, smear-resistant marking
    • Identification for cable or harness assemblies
    Operating Temperature
    • -30°C to +105°C
    Shrink Temperature
    • 90°C min.
    • 125°C full recovery
    Material
    • Cross-linked polyolefin
    Colors
    • White, yellow
    Physical Properties
    • Tensile strength: 1160 psi (8.0 N/mm2)
    • Elongation: 150% min
    • Longitudinal change: 20%
    • Flame retardant
    • Shelf life: 3 years at 18°C to 35°C
    Chemical Properties
    • Corrosive effect: none
    • Fungus resistance: no growth
    • Water absorption: 0.5%
    Electrical Properties
    • Dielectric strength: 20 V/mil (7.9 kV/cm)
    • Volume resistivity: 1014 ohm-cm
    Availability
    250 tubing pieces per package

    To economically meet the wire identification needs of the
    electronic interconnect, industrial, computer office automation,
    marine, and electrical markets,
    FIT-PRINT sleeves allow smearresistant, permanent identification.
    The sleeves, available in white or high-visibility bright yellow, feed
    directly into dot matrix printers (high carbon content ribbon
    recommended). A standard ballpoint pen may also be used.
    		 

    The perfect FIT for any need

    Need to protect a crimped terminal mechanically or environmentally? Color code wires for easy circuit identification? Make fast, reliable repairs to nicked or worn insulation? Whether your concerns are mechanical strain relief, environmental sealing, or organizing wires, Alpha Wire’s FIT® heat-shrink tubing is ideal for solving many challenges in electrical and electronic wiring.

    完美地满足任何需求

    需要保护压接终端免受机械磨损和环境影响吗？ 需要使用不同颜色标记线路吗？ 要快速、可靠地修复绝缘缺口或磨损吗？无论您关注的是机械应力释放、环境密封或电线管理，Alpha Wire 的 FIT® 热缩管都非常适合用于解决电气和电子布线中出现的许多问题。
    		 
       
    　 Part # Shrink Ratio　 Material Min Supplied ID　 Max Recovered ID Nom Recovered Wall　 Temperature
    FIT-700-21 3:1 IRR PO w/Thermoplastic Adhesive 0.75 0.24 0.09 -55 to 90 CA Prop 65, CSA 22.2, REACH Regulation, RoHS, UL 486D
    FIT-700-22 3:1 IRR PO w/Thermoplastic Adhesive 1.1 0.35 0.012 -55 to 90
    FIT-700-23 3:1 IRR PO w/Thermoplastic Adhesive 1.5 0.47 0.016 -55 to 90
    FIT-700-24 3:1 IRR PO w/Thermoplastic Adhesive 2 0.63 0.016 -55 to 90
    FIT-700-25 3:1 IRR PO w/Thermoplastic Adhesive 3 1.25 0.016 -55 to 90
    FIT-700-26 3:1 IRR PO w/Thermoplastic Adhesive 4.5 1.75 0.016 -55 to 90
    FIT-PRINT-1 3:1 XLPO 1 0.333 0 -30 to 105 CA Prop 65, REACH Regulation, RoHS, UL 224
    FIT-PRINT-1/2 3:1 XLPO 0.5 0.166 0 -30 to 105
    FIT-PRINT-1/4 3:1 XLPO 0.25 0.083 0 -30 to 105
    FIT-PRINT-1/8 3:1 XLPO 0.125 0.042 0 -30 to 105