1. ADVANT- ADAM Controllers 5000 Series
    ADAM-Machine Automation 設備自動化
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > ADAM-Machine Automation 設備自動化

    AMAX-1752 Open Frame Type 32-ch Isolated Digital Input Slave Modules 開放式框架型32通道隔離數字量輸入模塊
    看原圖
    		Advant-AMAX-1752

    商品編號: Advant-AMAX-1752

    AMAX-1752 Open Frame Type 32-ch Isolated Digital Input Slave Modules 開放式框架型32通道隔離數字量輸入模塊

    Distributed Motion Control Solution

    AMAX-1752

    Open Frame Type 32-ch Isolated Digital Input Slave Modules

    開放式框架型32通道隔離數字量輸入模塊

    產品特色
    • Communication baud rate, 2.5Mbps, 5Mbps, 10Mbps and 20Mbps are supported and switchable.
    • Onboard screw terminal for direct wiring
    • 2,500 VRMS Isolation voltage
    • Suitable for DIN-rail mounting
    • BoardID is switchable
    • Easily visible LED indicators on board to do diagnosis.
    •  
    AMAX-1752-AE
     
     
    General Power Consumption 600mW typical, 2 W max.
    Power Input 24 VDC within 200 mA ripple
    Temperature (Operating) 0 ~ 60°C (32 ~ 140°F)
    Humidity 5 ~ 95% RH, non-condensing (IEC 60068-2-3)
    Bus AMONet RS-485
    Certifications CE, FCC class A
    Power Supply 10 ~ 30 VDC (2A max)
    Dimensions 141 x 95 x 60 mm (5.6" x 3.7" x 2.4")
    Connector (1) RJ-45 x 2 are for communication port (2) I/O points use screw terminal type connector
    Isolated Digital Input Channels 32
    Isolation Protection 2,500 VRMS
    Input Impedance 3.2kO
    Opto-Isolator Response 100 µs (Max)
    Input Type Dry contact
    Isolated Digital Output Output Type Sink (NPN) (open collector Darlington transistors)
    Isolation Protection 2,500 VRMS
    Output Voltage 10 ~ 30 VDC
    Sink Current 1 ch: 500 mA (1 port)

     

    The AMAX-1752, AMAX-1754 and AMAX-1756 are compact open frame designs for horizontal placement, on-board screw terminal for direct wiring and on-board easily-visible LED indicators are for system diagnosis. All the digital I/O slave modules could be connected and distributed by standard LAN cables thereby saving wiring costs and maintenance. Three models are introduced: 32-ch digital input (AMAX-1752), 32-ch digital output (AMAX-1754) and 16-ch digital input/output (AMAX-1756). According to maximum communication baud rate, 2048 I/O points can be scanned and updated within 1.04 ms.

    AMAX的-1752，AMAX-1754和AMAX-1756是水平放置小巧開放式設計，板上的螺絲端子直接接線和板載易可見的LED指示燈是系統的診斷。所有的數字I / O從屬模塊可以被連接，並通過標準的LAN電纜從而節省佈線成本和維護分配。三種模式進行了介紹：32路數字輸入（AMAX-1752），32路數字輸出（AMAX-1754）和16路數字量輸入/輸出（AMAX-1756）。根據最大通信波特率，2048 I / O點可以被掃描，並在1.04毫秒更新。