1. ADVANT- ADAM Controllers 5000 Series
    ADAM-Machine Automation 設備自動化
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > ADAM-Machine Automation 設備自動化

    AMAX-2241/PMA 4-axis AMONet RS-485 Motion Slave Module for Panasonic Minas A 4軸AMONET RS-485運動從模塊
    看原圖
    		Advant-AMAX-2241-PMA

    商品編號: Advant-AMAX-2241-PMA

    AMAX-2241/PMA 4-axis AMONet RS-485 Motion Slave Module for Panasonic Minas A 4軸AMONET RS-485運動從模塊

    Distributed Motion Control Solution

    AMAX-2241/PMA

    4-axis AMONet RS-485 Motion Slave Module for Panasonic Minas A

    4軸AMONET RS-485運動從模塊

    產品特色
    • Max. 20 Mbps transfer rate
    • Max. 6.5 Mhz, 4-Axes pulse output
    • 28 bits counter for incremental encoder
    • 2~4 axes Linear interpolation
    • 2 axes circular interpolation
    • T-curve and S-curve velocity profiles support
    • Change speed on-the-fly
    • Easy installation with RJ45 phone jack and LED diagnostic
    • Easy installation for servo or stepping motor driver
    • Suitable for DIN-rail mounting

     

    AMAX-2241/PMA-BE
     
     
    General Power Consumption 5 W @ 24 V typical
    Dimensions 125 x 47.6 x 151 mm
    Advanced Function BoardID Switch V
    Encoder Channels 4
    Limit Switch Input 8
    Home Input Channels 4
    Emergency Stop Input Channels 1
    Slow Down Limit Switches 8
    Servo On Output Channels 4
    Position Compare Event V
    Position Latch V
    Axis Number of Axis 4
    Linear Interpolation V
    2-axis Circle Interpolation V

    AMAX-2240 series is used to increase the number of axes for an AMONet RS-485 distributed motion control network. These extension slave modules connect serially by a simple and affordable Cat.5 LAN cable, reducing the wiring between driver and controller. This is very suitable for highly integrated machine automation applications. Please select cable SCSI-20P and plug this cable into the motor driver and motion slave module.

     

    AMAX-2240系列被用來增加軸數為AMONET RS-485的分佈式運動控制網絡。這些擴展從模塊連接串聯通過簡單且負擔得起的5類LAN電纜，降低了驅動器和控制器之間的接線。這是非常適合於高度集成的設備自動化應用。請選擇電纜SCSI-20P和插件這根電纜進入電機驅動器和運動從模塊。