1. ADVANT- ADAM Controllers 5000 Series
    ADAM-Machine Automation 設備自動化
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > ADAM-Machine Automation 設備自動化

    PCI-1243U 4-axis Stepping Motor Control Universal PCI Card 4軸步進電機控制通用PCI卡
    看原圖
    		Advant-PCI-1243U

    商品編號: Advant-PCI-1243U

    PCI-1243U 4-axis Stepping Motor Control Universal PCI Card 4軸步進電機控制通用PCI卡

    PCI-1243U

    4-axis Stepping Motor Control Universal PCI Card

    4軸步進電機控制通用PCI卡

    產品特色
    • 4 axis stepping motor control
    • PCI universal bus
    • Up to 400 k pulse output rate
    • T-curve acceleration/deceleration
    • Pulse/Dir and CW/CCW pulse output mode
    • Up 24-bit step count
    • Opto-Isolated Digital input and output
    • Up to 1,500 Vrms system isolation
    • BoardIDTM switch

     

    PCI-1243U-AE
     
     
    General Power Consumption Typical: 5 V @ 340 mA; Max.: 5 V @ 500 mA
    Temperature (Operating) 0 ~ 60°C (32 ~ 140°F)
    Humidity 5 ~ 95% RH, non-condensing (IEC 60068-2-3)
    Temperature (Storage) -20 ~ 80°C (-4 ~ 170°F)
    Bus Universal PCI V2.2
    Dimensions 175 x 100 mm (6.9" x 3.9")
    Connector 1 x DB-62 Female
    Axes Number of Axes 4
    Isolated Digital I/O Channels 8
    Isolation Protection 3,750 VRMS
    Advanced Functions General Purpose
    DO Channels    		 8
    General Purpose
    DI Channels     		8
    Pulse Type Motion Control Motor Driver Support Stepping
    Interpolation 2-axis linear, 3-axis linear, 2-axis circular

     

    產品料號 說明
       
    PCI-1243U-AE 4-axis Low Cost Stepping Motor Control Universal PCI Card

     

    PCI-1243U is a 4-axis stepping motor control card with universal PCI interface. Each axis can be controlled directly through the cards I/O registers. This board is economic solution for stepping motor which provides 4 channels pulse train, T/S speed profile, on-the-fly velocity change and so on. The board is supplied with DLL library for Windows programmer to write the program. With the DLL driver, you can easily link to VC ®, Visual Basic® or BCB.

    PCI-1243U是一款4軸步進電機控制卡通用PCI接口。每個軸都可以通過該卡的I/ O寄存器進行控制。該板是為步進電機，提供了4個信道的脈衝串，T / S的速度曲線，對即時速度變化等經濟的解決方案。該主板提供有DLL庫的Windows程序員寫程序。隨著DLL驅動程序，您可以輕鬆地鏈接到VC®時，VisualBasic®或BCB。