1. ADVANT- ADAM Controllers 5000 Series
    ADAM-Machine Automation 設備自動化
    回上一頁

  2. 產品搜尋
    分　類：
    關鍵字：  

    首頁 > > ADAM-Machine Automation 設備自動化

    PCI-1245L 4-axis Stepping and Servo Motor Control Universal PCI Card 4軸步進和伺服馬達控制通用PCI卡
    看原圖
    		Advant-PCI-1245L

    商品編號: Advant-PCI-1245L

    PCI-1245L 4-axis Stepping and Servo Motor Control Universal PCI Card 4軸步進和伺服馬達控制通用PCI卡

    PCI-1245L

    4-axis Stepping and Servo Motor Control Universal PCI Card

    4軸步進和伺服馬達控制通用PCI卡

    產品特色
    • Encoder input is 4 MHz for 4xAB mode, 1 MHz for CW/CCW mode
    • Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting
    • Supports 2 axis linear interpolation
    • Supports T/S-curve
    • Supports speed override
    • Hardware emergency input
    • Watchdog timer
    • Supports programmable acceleration/deceleration rate
    • Programmable interrupt
    • RDY dedicated input channels & SVON/ERC dedicated output channels are switchable for general input and output purposes

     

    PCI-1245L-AE
     
     
    General Power Consumption Typical: 5 V @ 0.6 A, Max.: 5 V @ 1 A
    Temperature (Operating) 0 ~ 60°C (32 ~ 140°F)
    Humidity 5 ~ 95% RH, non-condensing (IEC 60068-2-3)
    Temperature (Storage) -20 ~ 85°C (-4 ~ 185°F)
    Connector 1 x 100-pin SCSI Female Connector
    Dimensions (L x H) 175 x 100 mm (6.9" x 3.9")
    Bus Type Universal PCI V2.2
    Encoder Interface Isolation Protection 2,500 VDC
    Input Type Quadrature (A/B phase) or up/down
    Input Range 5 ~ 10 V
    Max. Input Frequency 4 MHz under 4xAB mode
    Counts per Enc. Cycle x1, x2, x4 (A/B phase only)
    Pulse Type Motion Control Motor Driver Support Pulse-type servo/stepping
    Number of Axis 4
    Interpolation 2-axis linear interpolation
    Max. Output Speed 1 Mbps
    Step Count Range ±2, 147, 483, 646
    Pulse Output Type Pulse/direction (1-pulse, 1-direction type) or CW/CCW (2-pulse type)
    Position Counters Range of command and actual position
    Velocity Profiles T-Curve, S-Curve
    Machine Interfaces LMT+, LMT-, ORG
    Servo Driver Interfaces ALM, INP
    General Digital I/O 16-ch DI, 16-ch DO

     

    產品料號 說明
       
    PCI-1245L-AE Basic 4-Axis SoftMotion Controller

     

    The PCI-1245L is a 4-axis universal PCI card (supporting both 3.3 V and 5 V signal slots) stepping/pulse-type servo motor control card designed for entry-level applications which need to control interpolation, synchronization among multiple axes, with SoftMotion algorithm inside to perform the motion trajectory and precise movement. The PCI-1245L utilizes the high-performance FPGA to calculate the motion trajectories, synchronization timing control for multiple axes and input/output handling to offer functionality, such as 2 axis linear interpolation, T/S-curve, speed override, programmable acceleration/deceleration rate, 16 home modes and so on.
    In addition, all Advantech motion controllers use the “Common Motion API” architecture which is a unified user programming interface and graphical utility. This architecture saves application maintenance and upgrades. Programmers can benefit from integrating any Advantech SoftMotion controller without changing large amounts of the application code. User-friendly examples decrease programming load, helping users complete configuration and diagnosis easily.

    在PCI-1245L是一款4軸通用PCI卡（同時支持3.3 V和5 V信號插槽）步進/脈衝型伺服電機控制卡專為入門級應用而需要控制多個軸之間的插補，同步，同SoftMotion的算法裡面進行運動軌跡和精確的運動。在PCI-1245L採用了高性能的FPGA來計算運動軌跡，多軸和輸入/輸出處理提供功能同步定時控制，比如2軸直線插補，T / S曲線，速度倍率，可編程的加速度/減速率，16家模式等。
     此外，所有的研運動控制器使用“普通的運動API”體系結構，它是一個統一的用戶編程接口和圖形化工具。這種架構將應用程序的維護和升級。程序員可以受益於在不改變大量的應用程序代碼的集成任何研SoftMotion的控制器。人性化的例子減少編程的工作量，幫助用戶完整的配置和診斷容易。