Specification
Antenna Element | ||
Center Frequency | 1575.42 MHz +/-1.023 MHz | |
Polarization | R.H.C.P. (Right Handed Circular Polarization) | |
Absolute Gain @ Zenith | +5 dBi typical | |
Gain @ 10o Elevation | -1 dBi typical | |
Axial Ratio | 3 dB max | |
Output VSWR | 1.5:1 max | |
Output Impedance | 50 ohm | |
Low Noise Amplifier | ||
Center Frequency | 1575.42 MHz +/- 1.023 MHz | |
Power Gain | 28 +/-4.5dB | |
Bandwidth | 2 MHz min | |
Noise Figure | 1.5 max | |
Outer Band Attenuation | 20 dB min. @ Fo +/-50 MHz | |
Supply Voltages | 2.5 to 5.5V DC | |
Current Consumption | 13mA@ 3.0V DC,18mA@ 5.0V DC | |
VSWR | 1.5 max | |
Output Impedance | 50 ohm | |
Overall Performance: (antenna element, LNA & coax cable) | ||
Center Frequency | 1575.42 MHz | |
Gain | 30 +/-4.5dB | |
Noise Figure | 2.0 max | |
Bandwidth | 2 MHz min | |
Axial Ratio | 3 dB max | |
VSWR | 1.5 max | |
Output Impedance | 50 ohm | |
Environmental Conditions | ||
Operating Temperature | -30°C to +80°C | |
Storage Temperature | -40°C to +100°C | |
Relative Humidity | 40% to 95% non-condensing | |
Water Resistance | 100% waterproof | |
Physical Constructions | ||
Constructions | Enclosure Center feeds TNC connector for antenna output | |
Dimensions | 80(Dia) X 72(H) | |
Weight | 120 grams (without cable) | |
Standard Mounting | External flagpole mount, an optional accessory kit | |
Optional mounting plate | 1. Cabin roof-mount with stainless steel base & shaft | |
2. Rail side mount with stainless rod | ||
Cable & Connector | ||
RF | 10 meter RG58 A/U connectors are hermetically molded plastics for waterproof and stain relief | |
Cable Pulling strength | 12Kg for 5sec | |
Connector available | BNC (standard), other types (optional) |
This specification is subject to change without prior notice...