Intelligent Fiber Optical Multiplexer
產品概述
SL-2100是有多功能使用介面的光多工機,是用於點對點的光纖傳輸系統。客戶包括電信公司、電力公司、軍方與交通事業等需要穩固耐用的光纖傳輸。本設備提供多功能使用介面包括做16路E1/T1、FXO/FXS、V.35、RS530、X.21、RS232以及四路乙太網的傳輸於同一設備之中。而且支援光纖的1+1的光路徑自動保護。
本設備亦可根據傳輸距離的需要配置適合的光收發模組。特別內建遠端管理功能,本地設備可以監測與控制遠端的光終端機 。並且內建多樣的管理介面包括支援簡易網管協定(SNMP)、Telnet協定與HTTP協定、液晶面板控制(LCD&Keypad) 、VT100 craft port。使得建置與維護都相當便利。
產品特性
* Channel interface:E1, T1, V.35, RS530, X.21, RS232, FXO/FXS, and 10/100Base-T Ethernet ports
* Tributary card type:4*T1 interface / 4*E1 interface (75ohms or 120ohms) / 4*V.35 (V.35/ RS-530/ X.21)/ 4* FXO / 4*FXS / 4*RS232 / 4*2/4-Wire Analog, 4-Wire E&M , RS422/RS485 interface
* Optical module:Auto Laser shutdown (ALS), hot swappable 1+1 protection
* Alarm relay contact:major and minor alarms (audible and visible alarm output )
* External Alarm input
* Support SNMP function, HTTP / FTP / TFTP remote software upgradeable
* Support the TELNET function to configure and monitor local and remote devices through the TCP/IP network.
* Provides the parity error count for optical interface performance monitoring
* Configurations can have backup in nonvolatile memory.
* Configuration file upload / download.
* Aggregated Ethernet through put up to 100Mbps.
* Provides optical line local and remote loopback function.
* Provides E1 to V.35 cross connections.
* Low speed (E1, V.35) Local and remote loopback function
* Management interface:LCD / keys button, VT100 (DB9),RJ45 (for SNMP or Web Interface)
* External clock (Optional):E1 external TTL clock or PCM data Input through DB-9 connector
* OE module: Class 1 Laser product. Safety Standard IEC 825 compliant
技術規範
E1 Interface card:
⊙ Channel Capacity:4E1
⊙ Bit Rate:2.048Mbps ± 50ppm
⊙ Compliance standard:ITUG.703
⊙ Line Code:HDB3 / AMI
⊙ Line impedance:75Ω unbalanced or 120Ω balanced
⊙ Electrical Interface:Compliant with international standards ITU-T G.703
⊙ Jitter Tolerance:Compliant with ITU-T G.823
⊙ Jitter Transfer:Compliant with ITU-T G.742
T1 Interface card:
⊙ Channel Capacity:4T1
⊙ Bit Rate:1.544Mbps ± 32ppm
⊙ Line Code:B8ZS/AMI
⊙ Frame Format:SF, ESF, Unframed
⊙ Impedance: 100Ω balance
⊙ Electrical Interface:Compliant with ITU-T G.703
⊙ Jitter Tolerance: Compliant with ITU-T G.824
⊙ Jitter Transfer: Compliant with ITU-T G.743
V.35 Interface card:
⊙ Card type:V.35, RS-530, X.21
⊙ Data rate:n*64K, n=1~32 (64~2048kb/s)
⊙ Clock mode:Internal, External, DTE,
Recovery
⊙ Control signal:CTS follows RTS, DSR always ON except at test loop mode, DCD always ON except at fiber loss of signal condition
⊙ Loop-back:local / remote loop back, V.54
⊙ Connector:
HD-68 (SCSI-Ⅲ) Female with optional cables:
HD-68 to 4*V35(M34 female) cable
HD-68 to 4*X.21(DB15 female) cable
RS232 Interface card (DCE):
⊙ Channel Capacity:4 RS232
⊙ Bit Rate:UP to 115200 bps
⊙ Support Local loopback
⊙ Support Remote loopback
RS232E Interface card (Async/Sync and DCE/DTE):
Default is Sync and DTE mode (DB25 and male cable)
⊙ Channel Capacity:4 x RS232
⊙ Sync mode Bit Rate:UP to 64 Kbps
⊙ Async mode bit rate : up to 115.2K
⊙ Support Local Loopback
⊙ Support Remote Loopback
⊙ Sync & DCE using DB25 and female cable
(Need external clock source from DTE)
Sync & DTE using DB25 and male cable
Async & DCE using DB9 and female cable
Async & DTE using DB9 and male cable
2/4-Wire Analog Interface card:
⊙ 4*RJ-11 2/4W Analog interface module
⊙ Longitudinal Conversion Loss >60dB
⊙ Return Loss >30dB
⊙ Idle Channel Noise 75dB
⊙ CMRR >60dB
FXO/FXS Interface card:
⊙ Voice channel transparent to meet T.38 and Group III Fax relay at 2.4~14.4kbps Fax application
⊙ Support modem pass-through for Internet application.
⊙ Comply with G.711 A-law.
⊙ FXO unit: connected to a central office or PBX
⊙ FXS unit: connected to customer’s telephone.
⊙ Distance / bandwidth: 300m / 64K voice channel.
⊙ Connector: RJ11*4 (4 voice channel / Per unit)
4-Wire E&M interface card:
⊙ 4 channels 4-Wire E&M Type I module
⊙ Configured as Salve or Master mode via DIP-switch and jumper
⊙ Slave mode connected with PBX and Master mode with CPE
⊙ Longitudinal Conversion Loss > 60 dB
⊙ Return Loss > 30dB
⊙ Typical Idle Channel Noise 75dB
⊙ CMRR > 60 dB
⊙ E-lead input sensitivity 1mA and 80V (Max)
⊙ M-lead output –48V typically (master mode)
⊙ Connector: RJ-48 *4
RS422/RS485 interface card:
⊙ Channel Capacity: 4 * RS422/RS485
(2 or 4 wire)
⊙ Data rate: up to 115.2K asynchronous
⊙ Auto-speed detection and transmission
⊙ 2-wire half duplex with internal auto-direction control
⊙ 4-wire full duplex transmission
⊙ Isolated +5V power supply and photo-couple data conversion to protect internal system
⊙ Connector: screw type terminal block
10/100M Ethernet Interface:
⊙ Compliance:IEEE 802.3/802.3u
⊙ Configuration modes:10/100M, full/half-duplex, auto-negotiation and auto MDI/MDIX.
⊙ Maximum packet length 1552 Bytes.
⊙ Frame buffer:256K frames,
IEEE 802.3X standard
⊙ MAC Table:2000-entry MAC address mapping table.
⊙ Support VLAN/QOS function.
⊙ Support Port Rate Control.
⊙ Connector: RJ-45
Optical Interface:
⊙ Optical Source:MLM 1310/1550nm
⊙ Wavelength:1310/1550 ± 50nm
⊙ System Gain:19~30dB
⊙ Fiber connector types:SC,FC type
⊙ Bi-directional Fiber Optical Module (Option)
Physical Specifications:
⊙ Alarm contact:4 relay contacts
(DB-9 connector)
⊙ External Alarm:(DB-9 connector)
⊙ Operate condition:0~50℃
5%~95% without condensing
⊙ EMI:Comply with CISPR 22 class A (EN55022), FCC part 15 class A subpart B.
⊙ MTBF:48,000 hours minimum
Power Supply:
⊙ AC:90~240 V (47Hz~63Hz)
⊙ DC:-36~-72 V
⊙ Power consumption 30W maximum
Dimension:
W * D * H:440 x 285 x 44.5 mm
關鍵字: TEWAY, SL-2100, Intelligent, Fiber Optical Multiplexer, 智能光纖光端機, rs422, rs485, rs232, DB9, db25, rj11, rj45, |
|