3M™ Pleated Foil Shielded Cable
.050" 28 AWG Stranded, TPE Primary, Thin TPE Cover 90204 Series
• Can be used with IDC mass termination connectors
• Can be used in applications requiring standard
     impedance of 100Ω balanced (differential)
• Extremely low crosstalk, even when used in the all
     signal mode
• Perfect for board-to-board applications within
     electronic equipment, TPE covering prevents pleated
     copper foil from accidental shorting
• Solid pleated copper foil provides flexibility and 35
     db average shielding effectiveness
• See Regulatory Information Appendix (RIA) for
     chemical compliance information
    (RIA E1 & C1 apply)

Physical
Cover Material: Thermoplastic Elastomer (TPE) Color: Gray
Primary Material: Thermoplastic Elastomer (TPE) Color: Natural
Marking Standard: None
Canadian Option: AWM 20674 105C 300V VW1 3M NU C AWM IA 105C 150V FT1 EU < 50V
Conductors: 28 AWG, 7 × 36 AWG [ 7 × Ø 0.127 ] Tinned Stranded Copper
Shielding: Solid, Pleated, Copper Foil
　

Electrical
Voltage Rating: USA: 300V Canada: 150V EU: < 50V
Insulation Resistance: (Primary Cable) > 1 × 1010 Ω/10 ft. [ 3 m ]
Characteristic Impedance: Unbalanced: 53 Ω,  Balanced: 110 Ω
Capacitance: 28.1 pF/ft [ 92.2 pF/m ] 13.4 pF/ft [ 44.0 pF/m ]
Inductance: 0.08 μH/ft [ 0.26 μH/m ] 0.16 μH/ft [ 0.54 μH/m ]
Propagation Delay: 1.49 ns/ft [ 4.89 ns/m ] 1.48 ns/ft [ 4.86 ns/m ]
Velocity of Propagation: 68% 69%
Note: Unbalanced is measured between ground-signal-ground conductors, with shield grounded. Balanced is measured between signal conductors within a pair, with the shield floating.
　

Environmental
Temperature Rating: -20°C to +105°C
Flammability Rating: USA: VW-1 Canada: FT1
UL File No.: E42769, Style No.: 20674