3M™ Pleated Foil Shielded Cable
.025" 30 AWG Solid, TPE Primary, PVC Jacket 90111 Series
• Can be used with IDC mass termination connectors
• Can be used in applications requiring standard
     impedance of 75 Ω single ended
• Extremely low crosstalk, used in the all signal mode
     to quadruple signal density as compared to standard
     .050 inch flat ribbon cable
• CL2 rated, rugged design, and high reliability for
     peripheral applications
• Solid pleated copper foil provides flexibility and 35
    db average shielding effectiveness
• See Regulatory Information Appendix (RIA) for
     chemical compliance information
    (RIA E1 & C1 apply)
　

Physical
Cover Material: Polyvinyl Chloride (PVC)
Color: Gray
Primary Material: Thermoplastic Elastomer (TPE)
　

Marking:
Standard: (UL) CL2 75C 30 AWG 3M NU C AWM IIA/B 80C 150V FT1 EU < 50V
Conductors: 30 AWG [ 0.254 ] Tinned Solid Copper
Shielding: Solid, Pleated, Copper Foil
　

Electrical
Voltage Rating: USA: N.E.C. 725, CL2 Canada: 150V EU: < 50V
Insulation Resistance: (Primary Cable) > 1 × 1010 Ω/10 ft. [ 3 m ]
Characteristic Impedance: Unbalanced: 72 Ω, Balanced: 129 Ω
Capacitance: 21.0 pF/ft [ 68.9 pF/m ] 11.6 pF/ft [ 38.1 pF/m ]
Inductance: 0.11 μH/ft [ 0.36 μH/m ] 0.19 μH/ft [ 0.62 μH/m ]
Propagation Delay: 1.51 ns/ft [ 4.95 ns/m ] 1.50 ns/ft [ 4.92 ns/m ]
Velocity of Propagation: 67% 68%
Note: Unbalanced is measured between ground-signal-ground conductors. Balanced is measured between signal conductors within a pair.
　

Environmental
Temperature Rating: USA: CL2: 75°C Canada: 80°C
Flammability Rating: USA: N.E.C. 725, CL2 Canada: FT1
UL File No.: E118773, Power Limited Circuit Cable: CL2