3M™ Pleated Foil Shielded Cable
.025" 30 AWG Solid, TPE Primary, PVC Jacket, Low Skew 93101 Series
• Skew of less than 100 picoseconds/meter when
     terminated in unbalanced mode, with even wire
     signals (excluding edge conductors)
• Skew of less than 100 picoseconds/meter when
     terminated in the balanced mode, with a ground wire
     on either side of each signal pair
• Can be used with IDC mass termination connectors
• Solid pleated foil copper foil and copper foil overlap
     provide flexibility and 35 db average shielding
     effectiveness
• CL2 rated, heavy duty jacketing for improved
     protection of cable
• See Regulatory Information Appendix (RIA) for
     chemical compliance information
     (RIA E1 & C1 apply)

Physical
Jacket Material: Polyvinyl Chloride (PVC)
Color: Gray
Primary Material: Thermoplastic Elastomer (TPE)
Color: Natural
Marking Standard: (UL) CL2 75C 30 AWG 3M NU C AWM IIA/B 80C 150V FT1 EU < 50V
Conductors: 30 AWG [ Ø 0.254 ] Tinned Solid Copper
Shielding: Solid, Pleated, Copper Foil, wrapped with Copper Foil
　

Electrical
Voltage Rating: USA: N.E.C. 725, CL2 Canada: 150V EU: < 50V
Insulation Resistance: (Primary Cable) > 1 × 1010 Ω/10 ft. [ 3 m ]
Characteristic Impedance: Unbalanced: 53 Ω, Balanced: 104 Ω
Capacitance: 28.4 pF/ft [ 93.2 pF/m ] 14.5 pF/ft [ 47.6 pF/m ]
Inductance: 0.08 μH/ft [ 0.26 μH/m ] 0.16 μH/ft [ 0.52 μH/m ]
Propagation Delay: 1.52 ns/ft [ 4.99 ns/m ] 1.51 ns/ft [ 4.95 ns/m ]
Velocity of Propagation: 67% 67%
Note: Edge wires not included in transmission line properties. Unbalanced is measured between ground-signal-ground conductors with shield grounded. Balanced is measured between
signal conductors within a pair with the shield floating (balanced skew is measured with ground conductors on both sides of signal pairs).
　

Environmental
Temperature Rating: USA: CL2: 75°C Canada: 80°C
Flammability Rating: USA: N.E.C. 725, CL2 Canada: FT1
UL File No.: E118773, Power Limited Circuit Cable: CL2