1. IGUS-Chainflex® 同轴电缆
    IGUS-Chainflex® 伺服电缆
    IGUS-Chainflex® 量測系統電纜
    IGUS-Chainflex® 动力电缆
    IGUS-Chainflex® 数据电缆
  2. 產品搜尋
    分 類:

    首頁 > > IGUS-PVC-高柔性移動式控制电缆

    CF140.UL - 高柔性移動式銅網隔離控制电缆


    商品編號: IGUS-CF140

    IGUS CF140.UL - 高柔性移動式銅網隔離控制电缆




    最小弯曲半径为: 7.5-15 xd 

    Chainflex® CF140.UL control cable PVC

    1. Fine strand copper wire conductor
    2. Bunch stranding by core cord of high tensile strength
    3. Gusset-filling, pressure extruded
    4. Bending-resistant braided copper shield
    5. Pressure extruded

    • for medium load requirements
    • PVC outer jacket
    • Overall Shield
    • flame-retardant

    Classification of the Chainflex® cable:
    Class 4.2.1
    4: Cables with special design for continuous movement in E-Chains® for medium stressing capacity for radii from 7.5 x d, speed up to 3.0 m/s
    Travel distance:
    2: unsupported and sliding up to 50 m
    Resistance to oil:
    1: No oil resistance

    Chainflex® CF140.UL control cable PVC
    Cable design : 可選擇
    Protection cable : without protective conductor
    Outer diameter [mm]: 10
    Copper index [kg/km]: 69
    Weight [kg/km]: 111
    Part No. :
    Note: The mentioned external iameters are maximum values and may tend toward lower tolerance limits.
    Temperature range moving -5 °C to +70 °C, bending radius min. 7.5 x d for < 10 m travel; bending radius min. 15 x d for ≥ 10 m travel
    Temperature range fixed -20 °C to +70 °C, minimum bending radius 7,5 x d
    v max. unsupported/gliding 3 m/s, 2 m/s
    a max. 20 m/s²
    Length of travel Freely suspended travel distances and for gliding applications up to 50 m, Class 2
    Nominal voltage Number of cores <12: 300/500 V
    Number of cores ≥ 12: 300/300 V (according to DIN VDE 0245).
    Test voltage 2000 V (according to DIN VDE 0281-2).
    flame-retardant According to IEC 332-1, CEI 20-35, FT1
    Silicon-free Free from paint-wetting impairment substances (according to PV 3.10.7 – status1992)
    conductor Fine-wire stranded conductor consisting of bare copper wires (according to EN 60228).
    Core insulation Mechanically high-value TPE mixture.
    Core stranding Number of cores < 12: Conductors stranded in short pitch in one position.
    Number of cores ≥12: Wires combined together in a bunch by a core guaranteeing tensile strength with aligned, stranded in short pitches and stop directions, in especially low-torsion design.
    Core identification Cores < 0,5 mm²: color code in accordance with DIN 47100.
    Cores ≥ 0,5 mm²: Cores black with white figures, one wire green-yellow
    Inner jacket PVC blend suited to the requirements in E-Chain®.
    Entire shield Bending resistant, tin-plated braided copper shield.
    Cover about 55% linear, about 80% optical.
    Outer jacket Low-adhesion mixture on the basis of PVC, adapted to suit the requirements in Energy Chains® (following DIN VDE 0282 Part 10). Color: grey (comparable RAL 7001)
    UL/CSA Style 10493 and 20200, 300 V, 60°C
    CEI Following CEI 20-35
    CE Following 2006/95/EG
    Lead-free According to EU Directive (RoHS) 2002/95/EG
    Typical application areas
    • for medium load requirements
    • without influence of oil
    • preferably indoor applications
    • especially for freely suspended travel distance and for gliging applications up to 50m
    • Wood/stone processing, packaging industry, , handling, adjusting equipment