產品搜尋

分　類：
關鍵字：

首頁 > Power/Data-Cable(進口電線電纜)> HELUKABEL-Wire and Cable > HELUKABEL-Shipwiring & Marine Cables 船舶電纜

SHIPFLEX 113 Cable for drag chain, single core, halogen-free, EMC-prefered type , meter marking 屏蔽隔離拖鏈船舶電纜，無鹵

30184570

商品編號: HELUKABEL-SHIPFLEX-113

SHIPFLEX 113 Cable for drag chain, single core, halogen-free, EMC-prefered type , meter marking 屏蔽隔離拖鏈船舶電纜，無鹵

★★★★商品說明★★★★

SHIPFLEX^® 113

cable for drag chain, halogen-free, EMC-preferred type, meter-marking

Technical data

Special screened drag chain cable
UL-Style 20234
Temperature range
flexing -40°C to +80°C
fixed istallation -40°C to +80°C
Installation temperature
min. -25°C
Nominal voltage
to VDE U₀/U 0,6/1 kV
UL 1000 V
Insulation resistance
min. 20 MOhm x km
Minimum bending radius
7,5x cable Ø
Coupling resistance
max. 250 Ohm/km
Radiation resistance
up to 100x10⁶ cJ/kg (up to 100 Mrad)

Cable structure

Bare copper-conductor, to
DIN VDE 0295 cl.6, extra fine-wire,
BS 6360 cl.6, IEC 60228 cl.6
Special core insulation
Black power supply cores with imprint U1,
V2, W3
GN-YE conductor, depends of the
diameter of the conductor
Black control cores with white numbers 5,6
Screening of the control cores in pairs
wrapped with plastic aluminium foil, and
tinned copper braided screening, approx.
coverage 85%
Control cores stranded in pairs and laid up
in layers together with the power supply
cores with optimal lay length and stabilising
filler
Core wrapping between the layers of
stranding
Braided screening of tinned copper wires,
optimal coverage approx. 85 %
Full polyurethane outer sheath to
UL std. 1581 Tab. 50227
Sheath colour orange (RAL 2003)
with meter marking

Properties

Flame retardant to DIN VDE 0482-332-1-2,
DIN EN 60332-1-2/ IEC 60332-1 (equivalent
DIN VDE 0472 part 804 test method B)
Halogen-free to DIN VDE 0482 part 267/
DIN EN 50267-2-1/IEC 60754-1 (equivalent
DIN VDE 0472 part 815)
Oil resistant to IEC 60092-350,
appendix F
Behaviour at low temperature at -40°C to
IEC 60092-350, appendix E
Weather, ozon and UV-resistant
The materials used in manufacture are
cadmium-free and contain no silicone
and free from substances harmful to
the wetting properties of lacquers

Application

HELUKABEL^® SHIPFLEX^® 113 is a new developed and successfully tested screened special drag chain cable which meets the requirements of the strict standards for application in offshore-areas. This kind of cable combines the feeding cores with the control cores. For this two-line standard there is a Lloyds Register approval. The outer sheath insulation of non-adhesive Polyurethan allows the application in extremely oily and rough environmental conditions. For applications which go beyond standard solutions we recommend that you fill out our especially developed questionnaire for drag chains. Before installation in cable drag chains please read the installation instructions.

Part no.	No.cores x cross-sec. mm²	Outer Ø approx. mm	Cop. weight kg / km	Weight approx. kg / km	AWG-No.
19822	(4 G 1,5 + (2 x 1,0))	11,5	138,0	254,0	-
19827	(4 G 1,5 + (2 x 1,5))	12,0	148,0	265,0	-
19823	(4 G 2,5 + (2 x 1,0))	13,0	176,0	328,0	-
19828	(4 G 2,5 + (2 x 1,5))	14,0	187,0	339,0	-
19824	(4 G 4 + (2 x 1,0))	14,5	258,0	460,0	-
19829	(4 G 4 + (2 x 1,5))	15,0	268,0	475,0	-
19825	(4 G 6 + (2 x 1,0))	17,0	348,0	596,0	-
19830	(4 G 6 + (2 x 1,5))	17,0	358,0	607,0	-
19826	(4 G 10 + (2 x 1,0))	20,0	574,0	912,0	-
19831	(4 G 10 + (2 x 1,5))	20,5	584,0	924,0	-
19832	(4 G 16 + (2 x 1,5))	24,0	825,0	1205,0	-
19833	(4 G 25 + (2 x 1,5))	28,5	1283,0	1510,0	-
19834	(4 G 35 + (2 x 1,5))	32,0	1850,0	2005,0	-
19835	(4 G 50 + (2 x 1,5))	37,0	2540,0	2890,0	-

SHIPFLEX® 113

cable for drag chain, halogen-free, EMC-preferred type, meter-marking

SHIPFLEX^® 113