Armored Cable
Teck 90 (CSA)

5 kV Single Conductor Nonshielded

Aluminum interlocked armor
XLP insulation
Inner and outer PVC jackets
100% or 133% insulation level
　

SPECIFICATIONS
1. CONDUCTOR: Class B stranded, bare, soft copper
2. CONDUCTOR SHIELD: Cables have a semiconducting shield over the conductor
3. INSULATION: Cross-Linked Polyethylene (XLP), 90 mils insulation thickness
4. GROUNDING CONDUCTOR: Composed of individual wires applied helically over the insulation
5. INNER JACKET: Polyvinyl Chloride (PVC)
6. ARMOR: Aluminum-interlocking armor (for single conductor cables for use in AC circuits only aluminum armor is provided and non-magnetic [aluminum] connectors and lock
nuts must be used)
7. OUTER JACKET: Polyvinyl Chloride (PVC) heat-, flame- and moisture-resistant jacket, rated -40°C, the standard color is orange but colored jackets are available on request
8. STANDARDS:The cable is certified to CSA C22.2 No. 131 and No. 174 for use in CSA Class 1, Division 1, hazardous locations (CSA HL rated) and passes the FT4 vertical tray
flame test
9. AMPACITY: Based on 90°C column of Table 1 of the 2009 Canadian Electric Code, allowable ampacities for single copper conductors in free air based on 30°C
ambient temperature
10.TEMPERATURE: -40°C to 90°C
11.VOLTAGE: 5 kV

APPLICATIONS
For exposed or concealed wiring in wet or dry locations. For use in ventilated, non-ventilated and ladder type cable troughs and ventilated flexible cableway in wet or dry
locations. For direct earth burial.