Armored Cable
Teck 90 (CSA)

1 kV Two Conductor

Galvanized steel or interlocked aluminum armor
XLP insulation
Inner and outer PVC jackets

SPECIFICATIONS
1. CONDUCTOR: Class B stranded, bare, soft copper
2. INSULATION: Cross-Linked Polyethylene (XLP)
3. COLOR CODING: Surface color coding is standard for sizes up to and including AWG #6, for larger than sizes number coding is standard
4. GROUNDING CONDUCTOR: An uninsulated Class B stranded grounding conductor is included in the cable assembly
5. ASSEMBLY: Multiple conductor cables are assembled with suitable fillers and binder tape
6. INNER JACKET: Polyvinyl Chloride (PVC)
7. ARMOR: Aluminum or galvanized steel interlocking armor
8. OUTER JACKET: Polyvinyl Chloride (PVC) heat-, flame- and moisture-resistant jacket, rated -40°C, the standard color is black but colored jackets are available on request
9. STANDARDS: The cable is certified to CSA C22.2 No. 131 for Type Teck 90 and No. 174 for use in CSA Class 1, Division 1 hazardous locations (CSA HL rated). Cable passes
IEEE 1202/FT4 vertical tray flame test
10.AMPACITY: Based on 90°C column of Table 2 of the 2009 Canadian Electric Code, allowable ampacities for not more than 3 copper conductors in raceway or cable based on
30°C ambient temperature
11.TEMPERATURE: -40°C to 90°C
12.VOLTAGE:1 kV
　

APPLICATIONS
For exposed or concealed wiring in wet or dry locations. For use in ventilated, non-ventilated and ladder type cable troughs and ventilated flexible cableway in wet or dry
locations. For direct earth burial.