Armored Cable
Teck 90 (CSA)

5 kV Three Conductor Nonshielded

Galvanized steel or interlocked aluminum armor
Nonshielded
XLP insulation
Inner and outer PVC jackets
100% or 133% insulation level

SPECIFICATIONS
1. CONDUCTOR: Class B stranded, bare, soft copper
2. CONDUCTOR SHIELD: Cables have a semiconducting shield over the conductor
3. INSULATION:Cross-Linked Polyethylene (XLP), 90 mils insulation thickness
4. GROUNDING CONDUCTOR: An uninsulated Class B stranded grounding conductor is included in the cable assembly with suitable fillers
5. INNER JACKET:Polyvinyl Chloride (PVC)
6. ARMOR: Aluminum or galvanized steel interlocking armor
7. OUTER JACKET:Polyvinyl Chloride (PVC) heat-, flame- and moisture-resistant jacket, rated -40°C, the standard color is orange but colored jackets will be provided upon request
8. STANDARDS:The cable is certified to CSA C22.2 No. 131 Teck 90 cable and No. 174 for use in CSA Class 1, Division 1 hazardous locations (CSA HL rated) and passes the
FT4 vertical tray flame test
9. AMPACITY: Based on 90°C column of Table 2 of the 2009 Canadian Electric Code, allowable ampacities for not more than 3 copper conductors in raceway or cable based on
30°C ambient temperature
10.TEMPERATURE: -40°C to 90°C
11.VOLTAGE:5 kV

APPLICATIONS
For exposed or concealed wiring in wet or dry locations. For use in ventilated, non-ventilated and ladder type cable troughs and ventilated flexible cableway in wet or dry
locations. For direct earth burial.