Armored Cable
Interlocked Armor

5 kV Three Conductor Shielded

Aluminum interlocked armor
EPR insulation
133% insulation level

SPECIFICATIONS
1. CONDUCTOR: Class B stranded, bare, annealed copper per ASTM B3, strand shield is an extruded
semiconducting material
2. INSULATION: Ethylene Propylene Rubber (EPR) per ICEA S-93-639 (NEMA WC74)
3. SHIELDING: An extruded semiconducting thermosetting insulation shield is applied over the insulation, an uncoated copper tape is helically applied overall per ICEA S-93-639
4. ASSEMBLY:The three-phase conductors are cabled with a Class B stranded, uninsulated ground wire and fillers to make round, a binder tape is applied overall
5. ARMOR: Aluminum interlocked armor
6. OVERALL JACKET: Extruded, yellow Polyvinyl Chloride (PVC) that meets UL sunlight-resistance requirements
7. STANDARDS: Listed Type MV-105 per UL 1072 and Type MC per UL 1569 and meets ICEA S-93-639 requirements. Cable passes the UL 1685 and IEEE 1202 (70,000 Btu/hr) and
ICEA T-29-520 (210,000 Btu/hr) flame tests and are listed "for CT use"
8. AMPACITY:Based on a three-conductor cable isolated in air with a conductor temperature of 105°C and an ambient temperature of 40°C per 2008 NEC table 310.71
9. TEMPERATURE: 105°C
10.VOLTAGE: 5 kV

APPLICATIONS
For use in power circuits in industrial plants, commercial buildings, and central and substation utility applications. May be installed in trays, racks, hangers, etc.,
eliminating the need for conduit. Suitable for indoor and outdoor installation.