Armored Cable
Interlocked Armor

15 kV Three Conductor 133% Insulation Level

Aluminum interlocked armor
EPR insulation

SPECIFICATIONS
1. CONDUCTOR: Class B stranded, bare, annealed copper per ASTM B3 and B8, strand shield is an
extruded semiconducting material
2. INSULATION: Ethylene Propylene Rubber (EPR)
3. SHIELDING: An extruded semiconducting thermoset insulation shield is applied over the insulation and then an uncoated copper tape is helically applied. The method of phase
identification will be similar to ICEA Method 3 (1-Black, 2-Red, 3-Blue)
4. ASSEMBLY:The three-phase conductors are cabled with a Class B stranded, uninsulated ground wire and fillers to make round, a binder tape is applied overall
5. ARMOR: Aluminum interlocked armor
6. OVERALL JACKET: An extruded covering of red Polyvinyl Chloride (PVC) is applied overall that meets UL sunlight-resistance requirements
7. STANDARDS: Listed Type MV-105 per UL 1072 and Type MC per UL 1569 and is marked for CT use. Cable meets requirements of ICEA S-93-639 (NEMA WC74) and AEIC CS8.
Cable passes UL 1685 and IEEE1202/FT4 (70,000 Btu/hr) and ICEA T-29-520 (210,000 Btu/hr) flame tests.
8. AMPACITY: Based on a 5 kV-35 kV three-conductor cable isolated in air with a conductor temperature rating of 105°C and an ambient temperature of 40°C per
2008 NEC table 310.71
9. TEMPERATURE:105°C
10.VOLTAGE: 15 kV

APPLICATIONS
For use in power circuits in industrial plants, commercial buildings, and central and substation utility applications. May be installed in trays, racks, hangers, etc.,
eliminating the need for conduit. Suitable for indoor and outdoor installation.