Armored Cable
Continuous Corrugated Weld

15 kV Three Conductor 133% Insulation Level

Continuous aluminum armor
Shielded
EPR insulation

SPECIFICATIONS
1. CONDUCTOR: Class B stranded, bare, annealed copper per ASTM B3 and B8, strand shield is an extruded semiconducting material
2. INSULATION: Ethylene Propylene Rubber (EPR) per ICEA S-93-639 (NEMA WC74)
3. SHIELD:An extruded semiconducting insulation shield and then an uncoated 5-mil copper tape with 25% overlap is helically applied over the semiconducting layer
4. ASSEMBLY: The three-phase conductors are cabled with a Class B stranded ground wire and fillers to make round, a binder tape is applied overall
5. ARMOR: An impervious, corrugated continuous seam-welded aluminum alloy sheath in accordance with UL 1569, armor is pressure-tested and meets the grounding
requirements of NEC Article 250
6. OVERALL JACKET: Red, sunlight-resistant Polyvinyl Chloride (PVC)
7. STANDARDS:Cable shall be tested in accordance with UL 1072 requirements for Type MV-105, UL 2205 for Type MC-HL and ICEA S-93-639 (NEMA WC74). Cables meet the
UL 1685 and IEEE 1202/FT4 70,000 Btu/hr and the ICEA T-29-520 210,000 Btu/hr vertical tray flame tests and are marked "for CT use". Cable meets AEIC CS-8 qualification
testing requirements
8. AMPACITY: Based on a three-conductor cable isolated in air with a conductor temperature of 90°C and an ambient temperature of 40°C per NEC 310.71
9. TEMPERATURE: 90°C
10.VOLTAGE: 15 kV

APPLICATIONS
Primary power and lighting circuits in manufacturing and processing plants, feeders in industrial and commercial distribution systems, power supply to station auxiliaries in
electric power stations and substations. May be used in wet or dry locations installed in open tray, trough or ladder.