ANIXT-IMSA 20-1-Solid TRAFFIC SIGNAL 交通號誌控制電纜 Solid Conductor PE/PE 75°C, 600 Volt

產品搜尋

分　類：
關鍵字：

首頁 > Power/Data-Cable(進口電線電纜)> A-Power and Control Cable 電力及控制電纜 > An-TRAFFIC SIGNAL CABLE 交通號誌控制電纜

ANIXT-IMSA 20-1-Solid TRAFFIC SIGNAL 交通號誌控制電纜 Solid Conductor PE/PE 75°C, 600 Volt

5270790

商品編號: ANIXT-IMSA-20-1

ANIXT-IMSA 20-1-Solid TRAFFIC SIGNAL 交通號誌控制電纜 Solid Conductor PE/PE 75°C, 600 Volt

For use in signal systems, and approved for installationin underground ducts or as aerial cable supportedby a messenger.

★★★★商品說明★★★★

IMSA 20-1
SOLID CONDUCTOR
Polyethylene Insulation
Polyethylene Jacket
75°C, 600 Volt
　

APPLICATION:
For use in signal systems, and approved for installation
in underground ducts or as aerial cable supported
by a messenger.
　

SPECIFICATIONS:
1. CONDUCTORS: Bare solid annealed copper, conforming to the requirements of ASTM B-3,
latest edition.
2. INSULATION: The insulation compound before application to the conductors is heatstabilized
polyethylene, conforming to the melt-index requirements of ASTM D-1248, 65T,
Class B, Grade 4. After application to the conductors, the insulation meets all
requirements of the latest IMSA Specification No. 20-1 when tested in accordance with
ASTM D-1351, latest edition, and D-470, latest edition.
3. ASSEMBLY: The insulated conductors are laid up in compact cable form, and bound with
a spiral wrap of moisture-resistant tape applied to lap at least 10 percent of its width.
4. OVERALL JACKET: High molecular weight polyethylene, meeting the requirements of
ASTM D-1248, 65T, for Dielectric Material, Class C, Grade 5, J3.
5. STANDARDS: The completed cable meets or exceeds the latest International Municipal
Signal Association (IMSA) Specification No. 20-1.
6. TEMPERATURE: 75°C
7. VOLTAGE: 600 Volts