• Straight motion and precise crimping.
• Cuts, strips, and crimps all kinds of modular plugs
  WITHOUT CHANGING MODULAR (DIE) SET.
• More in one for crimping SOLID & STRANDED wire.
  Work with all standard plugs: AMP, SS, AT&T licence...etc.
• Tool HT-200/200R design with 10 position punches.
  For crimping 8P8C plug, please use the AMP 8P8C plug 
  with 2 cavities on each side as shown in  Fig 1.
• For stripping, there is a length guide at  the inside of 6mm area.
  Insert 4P or 6P conductor wire up to  the length guide
  (GUIDE BY ZINC PLATING)then press handles and pull wire
  to get right stripping. As 12mm is decided by cutting blade.
  Insert 8P or 10P conductor wire over cutting blade, so that the
  tool cuts and strips wire at the same time. 
• Tool 2008/2008R design with 8 position punches. For
  crimping the ordinary 8P8C plug , which has no
  additional cavity on each side as shown in  Fig2.

• HT-200/200R/2008/2008R parts are all made of  metal.
  All are rigid and durable.
• Built-in cutter on rear side and stripper on front side.
• For stripping round solid telephone wire, tool HT-S501A is
  effective and recommendable.
• Adjusting the 6P guide for crimping :use a"▁"shape SCREW
  DRIVER to set the guide to right side for crimping normal 6P
  plug, and set the guide to left side for crimping DEC plug.

Use with HT-S501A for stripping UTP/STP round wire.