Yeida-1303-0000X
DuraMAX US Style IP67 Face Plate 工業級 IP-67, 不鏽鋼美規 RJ45接頭, 網路壁掛式面板
DuraMAX-67TM industrial grade products provide the same transmission performance as all other DINTEK twisted-pair connectors, with the durability to withstand harsh industrial environments typical to factory floors, chemical, food processing plants, etc.
DINTEK’s DuraMAX-67TM IP67-rated faceplate housing design guarantees excellent protection against liquid and solid agents penetration. It protects against the effects of industrial vibrations, and allows for an extended life and reliable performance.
Features
- Endures high UV, humidity, oily and acidic environments
- Meets IP67 standard | Meets UL 1863 compliant
- Operating temperature : -25ºC to 70ºC
- A durable and fully enclosed design
Standards Conformance
- ISO/IEC 11801
- IEC 60603-7-51
- ANSI/TIA-568-C.0
- ANSI/TIA-1005
- UL 1863 compliant
- UL 1863 safety listed
- UL 94V-0 flammability standard
Physical Characteristics
- Stainless steel construction
- US faceplate style dimensions
Ordering Information
|
Product Number
|
Product Name
|
Ports
|
IP Rating
|
Construction
|
1303-00001
|
DuraMAX-67TM Single Port Industrial Faceplate
|
1
|
IP67
|
Stainless Steel
|
1303-00002
|
DuraMAX-67TM Dual Port Industrial Faceplate
|
2
|
IP67
|
Stainless Steel
|
1303-00003
|
DuraMAX-67TM Quad Port Industrial Faceplate
|
4
|
IP67
|
Stainless Steel
|
Face Plate Mounting Instructions
|
|
|
|
Strip off at least 1 inch of jacket from end of cable. Insert & terminate wires into IDC's according to the desired wiring configuration (T568B/T568A)
|
Place termination cap on jack and press cap to make sure it is fully seated
|
Adjust the cable to a suitable position in the opening of the cap
|
|
|
|
Faceplates come in 3 configurations: single, dual and quad sizes
|
Place the industrial connector into the faceplate from the back side of the plate
|
Use the large nut to fix the connector to the stainless steel plate
|
|
|
|
Screw the wall plate to the backbox in its correct orientation with the supplied screws
|
If attached the seal cover, mount the seal cover between the large nut and the faceplate
|
Insert an industrial patch cord into the industrial connector to connect to a network. If not installing a plug, place the seal cover on the outlet
|
KEYWORDS;DuraMAX-67TM, US Style, IP67, Face Plate, 工業級, IP-67, 不鏽鋼, 美規, RJ45, 接頭, 網路, 壁掛式, 面板
|