商品編號: Belden-7814A
Belden-7814A Paired - Category 6 Unbonded - Pair Cable Awg24 4P UTP CAT-6 網路線
Premise Horizontal Cable, Gigabit Ethernet, 100BaseTX, 100BaseVG
ANYLAN, 155ATM, 622ATM, NTSC/PAL Component or Composite Video,
AES/EBU, Digital Video, RS-422, 250MHz Category 6
Description:
24 AWG solid bare copper conductors, non-plenum, Polyolefin insulation, twisted pairs, central spline, rip cord, see color code chart
(below), PVC jacket (blue or grey).
SUITABLE APPLICATIONS:
Suitable Applications Premise Horizontal Cable, Gigabit Ethernet, 100BaseTX, 100BaseVG
ANYLAN, 155ATM, 622ATM, NTSC/PAL Component or Composite Video,
AES/EBU, Digital Video, RS-422, 250MHz Category 6
PHYSICAL CHARACTERISTICS:
CONDUCTOR:
Number of Pairs 4
Total Number of Conductors 8 AWG 24 Stranding Solid
Conductor Material BC - Bare Copper
INSULATION:
Insulation Material PO - Polyolefin
OVERALL CABLING:
Overall Cabling Fillers Central Spline
OUTER SHIELD: Outer Shield Material Unshielded
OUTER JACKET:
Outer Jacket MaterialPVC - Polyvinyl Chloride
Outer Jacket Ripcord Yes
OVERALL NOMINAL DIAMETER:
Overall Nominal Diameter 5.8 mm
MECHNICAL CHARACTERISTICS:
Operating Temperature Range - 20℃ To + 75℃
Bulk Cable Weight 45 kg/km
Max. Recommended Pulling Tension 150 N
Min. Bend Radius (Install) 12.7 mm
APPLICABLE SPECIFICATION AGENCY COMPLIANCE:
APPLICABLE STANDARDS:
NEC/(UL) Specification CM NEC Articles 800
CEC/C(UL) Specification CM
IEC Specification11801 Category 6
EU RoHS Compliant (Y/N) Y
EU RoHS Compliance Date Sept 2007
TIA/EIA Specification568-B.2 Category 6
Other Specification NEMA WC-63.1 Category 6, UL verified to Category 6
FLAME TEST:
UL Flame Test UL1685 UL Loading
SUITABILITY:
Suitability– Indoor (Y/N) Y
Suitability- Outdoor (Y/N) N
Sunlight Resistance (Y/N) N
Oil Resistance N
Non-halogenated N
PLENUM/NON-PLENUM:
Plenum (Y/N) N
ELECTRICAL CHARACTERISTICS:
Nom. Mutual Capacitance @ 1 KHz 5.6 nF/100m
Maximum Capacitance Unbalance 330 pF/100m
Nominal Velocity of Propagation 70 %
Maximum Delay @ 100 MHz 538 ns/100mMaximum Delay Skew 45 ns/100m
Maximum Conductor DC Resistance@ 20 Deg.C 9.38 Ohms/100m
Maximum DCR Unbalance @ 20 Deg.C 5 %
Maximum Intended Operating Voltage 80 V RMS
|